74HC74N (Dual D-type flip-flop )

74HC74N (Dual D-type flip-flop )

74HC74N (Dual D-type flip-flop )

Introduction :

?74HC174is a hex positive edge-triggered D-type flip-flops with individual datainputs (Dn) and outputs (Qn). The common clock (CP) and master reset (MR) inputs load and resetall flip-flops simultaneously.

The D-input that meets the set-up and hold time requirements on theLOW-to-HIGH clock transition is stored in the flip-flop and appears at the Q output. A LOW on?MRcauses the flip-flops and outputs to be reset LOW. Inputs include clamp diodes.

This enables theuse of current limiting resistors to interface inputs to voltages in excess of VCC

Features :

• Logic Type: Flip-Flop.
• Supply Voltage: 2V – 6V.
• Six edge-triggered D-type flip-flops.
• Logic Case Style: DIP.
• No. of Pins: 16.

Introduction :

?74HC174is a hex positive edge-triggered D-type flip-flops with individual datainputs (Dn) and outputs (Qn). The common clock (CP) and master reset (MR) inputs load and resetall flip-flops simultaneously.

The D-input that meets the set-up and hold time requirements on theLOW-to-HIGH clock transition is stored in the flip-flop and appears at the Q output. A LOW on?MRcauses the flip-flops and outputs to be reset LOW. Inputs include clamp diodes.

This enables theuse of current limiting resistors to interface inputs to voltages in excess of VCC

Features :

• Logic Type: Flip-Flop.
• Supply Voltage: 2V – 6V.
• Six edge-triggered D-type flip-flops.
• Logic Case Style: DIP.
• No. of Pins: 16.Introduction :

  ?74HC174is a hex positive edge-triggered D-type flip-flops with individual datainputs (Dn) and outputs (Qn). The common clock (CP) and master reset (MR) inputs load and resetall flip-flops simultaneously.

  The D-input that meets the set-up and hold time requirements on theLOW-to-HIGH clock transition is stored in the flip-flop and appears at the Q output. A LOW on?MRcauses the flip-flops and outputs to be reset LOW. Inputs include clamp diodes.

  This enables theuse of current limiting resistors to interface inputs to voltages in excess of VCC

  Features :

  • Logic Type: Flip-Flop.
  • Supply Voltage: 2V – 6V.
  • Six edge-triggered D-type flip-flops.
  • Logic Case Style: DIP.
  • No. of Pins: 16.