Raspberry Pi Camera Module 3
The Raspberry Pi Camera Module 3 is the latest entry in the Official Raspberry Pi range of camera modules, offering a new 12 Megapixel Sony IMX708 image sensor, powered autofocus, improved low-light sensitivity and HDR (High Dynamic Range) support for your Raspberry Pi projects!
To use this camera with a Raspberry Pi 5, you will need to buy this adapter cable!
To use this camera with a Raspberry Pi Zero, you will need to buy this adapter cable!
The new Camera Module 3 is available with a standard 75° or wide-angle 120° lens (select version before adding to cart), giving you more options for your specific project needs. As with the previous generation, we also have an infrared-sensitive NoIR version available for night photography.
The module is capable of 4608×2592 pixel images and 4608×2592 @14 FPS/2304×1296 @56 FPS/1536×864 @120FPS video. When HDR is enabled, the resolution is limited to 2304×1296 @ 30 FPS.
Compatibility (Important!)
Accessories
The Camera Module 3 is mechanically identical to the previous Camera Module V2 apart from the front sensor section. The new sensor is larger and may not fit all previous camera accessories. We have updated all of our camera accessories with compatibility information in the descriptions.
Software
The Camera Module 3 can only be used with libcamera – the previous raspistill/raspivid libraries will not work
You will need to update Raspberry Pi OS as the Camera Module 3 requires a new driver and a specific version of libcamera
Boards
The Camera Module 3 is compatible with all Raspberry Pi boards with a full-size camera connector (CSI connector)
To use this camera with a Raspberry Pi 5 (which has a smaller CSI connector), you will need to use a Raspberry Pi 5 camera adapter cable
To use this camera with a Raspberry Pi Zero (which has a smaller CSI connector), you will need to use an adapter cable
Features
Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
High signal-to-noise ratio (SNR)
Built-in 2D Dynamic Defect Pixel Correction (DPC)
Phase Detection Autofocus (PDAF) for rapid autofocus
QBC Re-mosaic function
HDR mode (up to 3-megapixel output)
CSI-2 serial data output
2-wire serial communication (supports I2C fast mode and fast-mode plus)
2-wire serial control of focus mechanism
Specifications
Sensor: Sony IMX708
Resolution: 11.9 megapixels
Sensor size: 7.4mm sensor diagonal
Pixel size: 1.4μm × 1.4μm
Horizontal/vertical: 4608 × 2592 pixels
Common video modes: 1080p50, 720p100, 480p120
Output: RAW10
IR cut filter: Integrated
Autofocus system: Phase Detection Autofocus
Dimensions: 25 × 24 × 11.5mm (12.4mm height for Wide variants)
Ribbon cable length: 150mm
Cable connector: 15 × 1mm FPC
Compliance:
FCC 47 CFR Part 15, Subpart B, Class B Digital Device
Electromagnetic Compatibility Directive (EMC) 2014/30/EU
Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU
Production lifetime: Raspberry Pi Camera Module 3 will remain in production until at least January 2030
Lens Specifications
Standard
Effective focal length 4.74mm
f/1.8
Diagonal field of view 75 degrees (at 16:9)
35mm equivalent focal length roughly 28mm (full width) – 30mm (3:2 crop)
Focus 10cm – infinity
Reviews
There are no reviews yet.